SOLAR PANEL JUNCTION BOX 15 AMP DIODES, WIRES,WIRE CONNECTORS WATERPROOF PRO BOX

Description

HEART OF THE SUN-SOLAR
Sells  many items needed to build your own solar panels, solar cells, junction boxes, tabbing wire, buss wire, solder, soldering irons,  EVA encapsulation, rosin flux pens, wire  connectors, and more.  visit my store for  a complete list. Not sure what you need send me a question and some details. Brian
Simply solder your Buss wire from your panel into the easy to get to  tabs on the junction box then snap  the lid on.  The lid has a rubber gasket waterproofing the connections.
The tabs  on the junction box are pre-soldered for easily soldering the Buss wire.
Use 100% silicone to seal your junction box to your panel.
A small flat screwdriver will remove the junction box lid.
The cables are marked with a (+)  + ( - )  sticker for easily identifying  the cables.
Standard 4mm wire ( 12 AWG)
Cable length  35 inches (  90 mm)  to end of connector.
4 RAIL 3 DIODES  SOLAR JUNCTION BOXES ARE MADE FOR PANELS WITH 4  BUSS BARS OF WIRE  COMING OUT OF THE BACK
Can also be used  on any diy panel with just 2  buss bars coming out.  simply attach the  left rail to the neg(-) buss  wire, and the right hand rail to the  pos(+) buss wire.
W
Max Voltage:
1000V
Junction box Current:
3-15A
Temperature Range
:
-40
~
+85
w
aterproof
:
IP65
Flame class:UL94V-0
Box material:PPO
Joining of ribbon:soldering
Product No.
DLC608
Amount of rails
4rail terminals
Rated Voltage
TUV 1000V DC
Rating current
8A
Cable size
4.0mm
Pin OD:
4.0mm
Proof voltage:
TUV 6000V AC(1Min) / UL 2200V DC (1Min)
Pollution degree:
2
Protection class:
Class II
Contact Material:
Copper, tin plated
Contact resistance:
≤5mΩ
Protection degree:
IP 65
Withdrawal Force:
≥50N
Temperature Range:
-40~+85
Flame Class:
UL94V-0